What are the nine points to pay attention to using a sewing machine?

Before using a computer sewing machine, please clean the computer sewing machine, clean up the dust accumulated in the transport, confirm that the voltage set is correct and the power plug is properly inserted. In addition, when the power supply specifications are different, Please do not press the red power switch to start the computer sewing machine to allow it to work, in case the computer box burning charges.

The following points should be noted when a computer sewing machine is in operation:

In order to prevent personal accidents, please do not put your fingers near the needle when turning on the power supply and when the machine is running.

In order to prevent personal accidents involved in the machine, the computer sewing machine should not put fingers, hair, clothes near the pulley, V-shaped belt, motor, or put things on the machine.

In order to prevent personal accidents, please do not put your fingers inside the bonnet during the operation of the sewing machine.

In order to prevent personal accidents, please do not operate the computer sewing machine under the condition of removing the belt shield, finger protector and other safety devices.

5, in order to prevent sudden start causing personal accidents, drop the needle car, or when removing the belt cover and V-shaped belt, please be sure to turn off the power.

In order to prevent personal accidents, take care not to clamp hands when dropping the needle or returning to the original position.

Please don't wipe the head surface with paint thinner.

8, computer needle car operation, spinning shuttle high-speed rotation. In order to prevent the hand from being harmed, please do not approach the handle during operation.

9, oil tank does not add needle car oil, never run computer needle car sewing machine.

After using a computer needle and sewing machine:

After using the computer sewing machine, you must perform maintenance, inspection, and repair operations. Please turn off the power and confirm the computer sewing machine and motor. After complete stop, operate again.(When using a clutch motor, note that the motor will continue to rotate for some time after turning off the power supply due to inertia.