Dongguan Industrial Sewing Machine Co., Ltd
Contact: Mr. Han
Address: No. 154, Qiaonan Road, Third Industrial Zone, Houjie Town, Dongguan City, Guangdong Province, China
Website : en.dggfzc.com
Most of the computer sewing machines are used in garment factories. The computer sewing machines are also required to be maintained after a period of time. The following is to introduce the common knowledge about the maintenance of sewing machines.
(1) Cleaning of delivery teeth
Remove the screw between the needle plate and the cloth tooth, remove the cloth, dust, and add a small amount of sewing machine oil.
(2) Cleaning of other parts
All parts of the surface and panel of the sewing machine should be cleaned regularly.
(3) Cleaning of shuttle beds
The shuttle bed is the core of the sewing machine and is also a place where drunkenness is prone to failure. Therefore, it is necessary to often remove dirt and add a small amount of sewing machines.
Maintenance of computer sewing machines
These parts of the sewing machine should be Lube, the amount of fuel should not be too much only need one or two drops.
(1) The oil holes on the head, lubrication of the upper shaft and the connected parts of the upper shaft.
(2) Clean the movement of the lower part of the machine plate and add a little oil.
(3) The internal parts of the panel and the moving parts connected by each part.
(4) Lubricating foot and needle rods and their connected parts.
Computer Needle Machine Note:
(1) After the work is completed, insert the needle into the pinhole plate and lift the pressure foot. It is best to cover the head with a hood to prevent dust from invading.
(2) When starting work, first check the main parts, how the weight of the step is, whether there is a special sound, whether the needle is normal, etc.. If you find abnormal, please check it in time.
(3) After a long period of use, a major overhaul will be carried out. If more worn parts are found, new ones will need to be replaced.
Rational use and maintenance of sewing machines can extend their service life and create more value for us. Before using the computer needle truck, please clean the computer needle truck, clean up the dust accumulated in the transport, confirm that the voltage set is correct and the power plug is inserted correctly. In addition, in the case of different power supply specifications, Please do not randomly press the red power switch to start the computer needle to let it work, in case the computer box burn to scrap.